The Graco RTX 2500pi Interior Drywall Texture Sprayer is ideally suited for contractors that apply texture on medium-to-large jobs. The 2500pi over the smaller 2000pi has an additional 2 gallons of material capacity, and higher pressure levels for longer hose lengths and texture delivery. The "pi" is part of the RTX Professional Interior Series, and has the everyday reliability that you expect from Graco Drywall Texture Sprayers with the addition of SmartStart™, Heavy Duty Aluminum Gun, Twin-Cylinder Compressor, and WideTex Tips. So if you are looking for a drywall texturing solution designed for tradesmen and contractors with time-saving features that will increase production - The Graco RTX 2500pi is your sprayer
The RTX Texspray 2500pi will spray drywall textures that include Orange Peel, Fine Splatter, Splatter, and Light Knockdown. This machine is not suited for Heavy Knockdown drywall texture, or thick mix applications. The 2500pi can spray All-Purpose, Lightweight, and Wall/Ceiling Spray Texture Compound Mixes
SmartStart™ is an innovative system that automatically starts pump and compressor when gun trigger is pulled, and shuts them off when released. This not only extends the pump/compressor life, reduces vibration and noise - but also provides a Soft-Start that eliminates the extra material blast that accompanies machines with a constant run pump.
- 1 in x 25 ft Material Hose
- 3/8 in x 25 ft Air Hose
- Heavy Duty Texture Gun
- 3mm, 4mm, 6mm, 8mm round Nozzles
- WideTex Adapter with 4mm, 6mm, 8mm, 10mm, 12mm, XL W Tips
Job Site Proven RotoFlex Pump
- FlexChange™ Pump Section No-Tools pump replacement system
- Swap out a spare RotoFlex pump in seconds!
Skip-Bond Material/Air Hose 1"
- Both hoses are permanently bonded together for easy handling
- Offers improved flexibility
Adjustable Material Flow Control
- Dial up to spray thicker materials; Dial down for less flow and maximum control
- Easy-to-read gauge
Heavy-Duty Aluminum Trigger Gun with Integrated Prime Selector
- Durable aluminum design
- Oversized fluid/air passages
- Allows unit to be put in prime mode right at the gun!
WideTex Tips & Adapter
- Allows spraying in a uniform fan pattern
- Spray repeatable patterns with less material and pressure adjustment
- Increases productivity by more than 20%
- MAX GPM (LPM): 2.5 (9.5)
- MAX PSI (BAR): 100 (6.9)
- CFM (CM) @ 20 PSI: 6.1 (.17)
- HOPPER GAL (L): 15 (57)
- MOTOR TYPE: AC
- MOTOR HP: 1.7
- VOLTAGE: 120V
- MAX HOSE FT (M): 75 (23)